PROGASI Race 300 Wave

  • Description
  • Specification

Progasi Race 300 Wave

It's time for a real race! Progasi Race 300 will help overcome the force of attraction and rewrite the laws of physics again! Bold and shocking, you won’t be able to take your eyes off it. Impressive performance and a sense of control allow the pilot to reach the podium consistently!


Powerful Engine

New productive, reliable engine from Zongshen NB300 (ZS174MN-5) with liquid cooling and powerful fan Panasonic, this is the top version of the most popular engine Zongshen CBS300 with 74th piston. The new cylinder head allows for maximum power and torque. A 5-speed transmission with a reinforced basket and clutch discs from the Japanese brand F.C.C. allows you to correctly distribute and transmit all power. The system of additional clutch cooling and the technology of easy squeezing, allows to use the motorcycle on the mode "at the limit".The Nibbi Racing sports carburetor paired with the correct Progasi Exhaust System Megabomb and Lucas intake will be the final chord of the superiority of this power plant. You will get a powerful and bold engine sound!


Latest generation chromium molybdenum frame and aluminum rear arm

The Progasi Race 300 frame is perfect weighing and geometry. Leveraging Gas-Gas and KTM's 2022 best practices. It is made with an emphasis on reliability and long service life. All nodes are high-quality boiled, there are additional reinforcements. A plastic frame is specially attached to the frame, which protects the motobots and the frame. The frame design allows you to service the motorcycle, adjust the valve clearances and replace the plug without removing the engine. The rear arm is made of aircraft aluminum, which gives high stiffness to twist.


Increased volume fuel tank

There is a fuel tank of increased volume which allows you to travel long distances without worrying about the nearest gas station.


KYB-Tech sports fully adjustable suspension

The entire line of Progasi motorcycles is equipped with a sports fully adjustable release and compression KYB-Tech suspension. "Our accuracy is your advantage" is the slogan of the Japanese company KYB.


CNC milled crossbeams

They are made of aircraft aluminum 7075. Withstand heavy loads, light and durable. The steering wheel position adjustment system, "closer or further," allows you to adjust the convenient steering wheel position in the rack. Rudder brackets are also milled under the 1-1/8 "rudder (fatbar, "thick rudder").


Sports aluminum wheels 21/18

Progasi reinforced aluminum rims are equipped with tugs, they pull the tire to the rim, preventing it from turning while driving. Reinforced hubs are also used, which are made of a single piece of aluminum, which creates maximum structural strength. Kenda tires have long proven themselves in extreme sports. On Progasi, the most powerful and toothy rubber will be used. It behaves perfectly in mud and sand, also withstands the twisting of spikes for skiing in winter and shows itself perfectly on rugged terrain.


Acerbis Seat

The signature Progasi seat, made using Acerbis anti-slip grip technology, holds any rider like a superglue. You won't have a chance to slip off it. A special ribbed waterproof coating will make you comfortable in all weather conditions. The seat won't get wet in the rain.


Powerful Progasi brakes

Brakes are the most important component of the motorcycle, on which the safety of the rider directly depends, as well as the speed of cornering. All Progasi models have additional expansion tanks and reinforced brake hoses for flawless results. A two-piston brake system is installed in front and a one-piston brake system is installed in the back. The motorcycle proved can be stopped at any speed.


Electronic instrument panel

There is a multifunctional dashboard with speedometer, tachometer, odometer, transmission and battery indicator.


Fully Led Optics

The latest generation of led light is made according to the highest standard. The headlight is equipped with near and high beam, as well as stylish "Cilia" overall lights. A brake light with overall lights is also installed at the rear.


Progasi aluminum steering wheel

The motorcycle is equipped with a durable aluminum steering wheel with a diameter of 28 mm of variable cross section. There is an optimal angle of inclination.The bending strength has been increased by one and a half times, at the same time we managed to maintain the ductility of the metal. The Acerbis rudder cushion will protect the rider from injury.


Choho drive chain

Choho produces motor chains with a special sealing ring in the structure. This ring, made of hard rubber, is located between the inner and outer plates of the roller chain: it does not let dust through from the outside and retains lubrication inside. Thus, the O-ring provides no excessive stretching, a long chain life that does not require lubrication, and also has a reduced noise level.


Accelerator Short-Stroke Handle Nibbi Racing

A short-stroke NIBBI gas handle with a roller is installed on the bearing. An indispensable element when using a bike on steep climbs, as well as in places with various obstacles, for the passage of which you need to quickly unscrew the gas handle without intercepting the steering wheel and without losing control. The short-stroke accelerator handle also allows you to independently adjust the position of the cable opening the carburetor shutter, so that the rider can choose the brush force necessary for acceleration, the most optimal for his driving style.


Reinforced brake and grip handles with fall protection

The reinforced thoughtful design protects the handles from damage and folds in case of hit. There is also the geometry of easy squeeze used.


Proven quality

All Progasi motorcycles have a European quality certificate. Shell 10w40 oil is used on a regular basis. Waterproof wiring connectors are used. All bearings are treated with special grease. "Details matter" is the slogan of the Catalonia born company Progasi.


Motorcycle type Enduro
Engine type 4-stroke, water-cooled, overhead camshaft, 4 valves, balancer shaft
Engine model NB300 (ZS174MN-5)
Number of cylinders One cylinder
Cylinder size (mm) 74×65
Cylinder displacement (cc) 279.6
Compression ratio 10.5:1
Maximum power (hp) 31/8500
Maximum torque (N.m./rpm) 24/7500
Torque to wheel Chain
Fuel delivery system Carburetor NIBBI RACING BLACK PWK34
Ignition type C.D.I
Engine starting system Electric/Kick
Transmission 5-speed 1-N-2-3-4-5
Suspension KYB-Tech, fully adjustable
Dimensions of motorcycle (l/h/w) 2170x830x1285
Wheelbase (mm) 1465
Seat height (mm) 930
Ground clearance (mm) 350
Dry weight (kg) 120
Brakes (front/rear) Disc/Disc, hydraulic
Front tire Kenda 80/100-21
Rear tire Kenda 120/100-18
Fuel tank (l) 11
Engine oil volume (l) 1.1
Maximal load (kg) 150
Maximal speed (km/h) 140
Battery PROGASI 12N7Ah

Manufacturer: PROGASI

Vehicle type: Enduro

Model: Race 300 Wave

Color:

5 499 €

Newsletter

Subscribe to our newsletter and you'll be up to date on all Progasi news and offers!